Precision Aircond Installation, Copper Piping & Relocation in Kuala Lumpur (From RM250)
A brand-new RM2,000 Daikin or Panasonic inverter aircond is only as reliable as the technician who installs it. Across Kuala Lumpur, over 80% of premature aircond failures gas leaking out within 3 months, water staining new plaster ceilings, and noisy vibrating walls are caused by installers using thin, sub-standard copper pipes, skipping the vacuum pump process, or laying drainage pipes without a proper gravity slope.
At Elite Aircond Expert’s, we provide high-precision residential and commercial aircond installation, safe dismantling, and house-to-house relocation across Sentul, Jalan Ipoh, Mont Kiara, Kepong, Setapak, and KLCC. Whether you purchased your own aircond online (Shopee, Lazada, Harvey Norman, Senheng) or are moving units from your old condo to a new property, we install every system using thick SWG 22 (0.71mm) copper piping, 1/2-inch Superlon insulation, SIRIM-certified pure copper cables, and mandatory digital two-stage vacuum purging.
Every new installation is protected by our 1-Year Installation Workmanship & Flare-Seal Warranty.
- Thick R32/R410A Grade Copper Piping: SWG 22 / 0.61mm–0.71mm wall thickness that never cracks under high inverter pressure.
- Mandatory Vacuum Pump Purging: 15 to 30 minutes of deep vacuuming on every single installation never skipped.
- High-Rise KL Condo Permit Ready: We provide SSM registration, technician IC list & safety harness compliance for JMB approval.
- 1-Year Installation Workmanship Warranty covering copper flare connections, bracket stability, and drain gradient.
What Is Included in Our Standard Wall-Split Installation Package?
When you book our standard back-to-back or adjacent-wall installation package (starting from RM250 for 1.0HP), everything required for a clean, durable setup is included upfront:
- Up to 8 Feet of Thick Grade-A Copper Piping (twin insulated liquid and suction lines rated for high-pressure R32 and R410A systems).
- 1/2-Inch High-Density Closed-Cell Insulation (Armaflex / Superlon) to prevent condensation sweating inside your ceiling or trunking.
- Up to 8 Feet of SIRIM-Approved 3-Core / 4-Core Pure Copper Inter-Unit Control & Power Cable.
- Up to 10 Feet of Rigid UPVC Condensate Drain Pipe installed with a laser-leveled downward gradient.
- Heavy-Duty Powder-Coated Outdoor Compressor L-Bracket with expansion wall bolts and anti-vibration rubber pads.
- Full Two-Stage Vacuum Pump Purging + Digital Manifold Leak Test before releasing refrigerant.
Why We Never Skip Vacuum Pumping (And Why "Air Purge" Ruins R32 Airconds)
Lazy installers often skip carrying a heavy vacuum pump up to your condo and instead release a burst of refrigerant gas to “blow out” the air in the copper pipes. For modern R32 and R410A inverter airconds, this shortcut is disastrous:
1. Synthetic POE compressor oil inside R32/R410A systems absorbs moisture from trapped air and turns into acidic sludge that eats your compressor windings.
2. Non-condensable air left inside the copper pipe raises head pressure, makes the outdoor unit run 15% hotter and louder, and prevents the indoor coil from reaching full coldness.
At Elite Aircond Expert’s, our technicians connect a two-stage rotary vacuum pump to every newly installed or relocated unit for a full 15 to 30 minutes, verifying a negative vacuum seal on the compound gauge before opening the service valves.
Safe Aircond Dismantle & Condo-to-Condo Relocation Service in KL
Moving out of a rented condo in Sentul, Setapak, or Mont Kiara and want to bring your airconds to your new house? If an untrained mover simply cuts or unscrews the copper pipes, all your refrigerant gas escapes into the air (costing you RM150+ per unit to refill later) and moisture enters the compressor.
Our 4-step relocation protocol protects your hardware and saves your gas:
Step 1: Compressor Refrigerant Pump-Down
We run the aircond in cooling mode, lock the liquid valve on the outdoor unit with an Allen key, and draw 100% of the refrigerant gas back into the outdoor condenser before closing the suction valve.
Step 2: Sealed Pipe Capping & Wall Patching
We flare-unscrew the copper pipes, immediately seal both indoor and outdoor valves against dust and humidity, unmount the brackets, and neatly cover the wall hole.
Step 3: Safe Transport & Optional Chemical Wash
While the indoor unit is already off the wall, many clients opt to add a discounted RM100 chemical wash so the unit goes up on the new house wall looking and smelling brand new.
Step 4: Re-Installation, Vacuuming & Pressure Balancing at Your New Address
We mount the unit at your new KL home with new copper piping, vacuum the lines, and release your saved refrigerant gas back into the circuit.
Customer Feedback
2026 Aircond Installation, Dismantle & Copper Piping Price List (KL)
Clear, itemized installation and relocation rates across Kuala Lumpur:
| Service Description | 1.0 HP – 1.5 HP | 2.0 HP | 2.5 HP – 3.0 HP |
|---|---|---|---|
| Dismantle Existing Wall Unit Only (With Gas Pump-Down) | RM 100 / unit | RM 120 / unit | RM 150 / unit |
| Install Only on Existing Developer Copper Piping Point | RM 180 / unit | RM 220 / unit | RM 260 / unit |
| Standard Installation + 8ft New Copper Piping & Bracket | RM 250 – RM 280 | RM 320 – RM 360 | RM 380 – RM 450 |
| Dismantle + Relocate + Re-Install (With 8ft Copper) | RM 330 / unit | RM 420 / unit | RM 500 / unit |
| Extra Copper Piping & Wiring Beyond 8 Feet (Per Foot) | RM 18 / ft | RM 22 / ft | RM 26 – RM 28 / ft |
| White PVC Casing Trunking for Copper Pipe (Per 6ft Length) | RM 35 / length | RM 35 / length | RM 40 / length |
| New 15A Power Point Supply (From Nearest Socket/DB) | RM 120 – RM 180 | RM 150 – RM 220 | RM 180 – RM 260 |
Frequently Asked Questions
Everything you need to know about aircond installation, condo permits, and warranties.
.png)